14297-RF
4677817expander tool set Ø 3/8" - 1 1/8"
The REFCLAMP measures both the tube and air temperature as well as the humidity in the ambient air of mobile and stationary refrigeration systems and heat pumps.
It has two sensors included: a pipe temperature sensor and a humidity sensor. Furthermore, the outside temperature can be measured by means of a plug-in K-type sensor.
The illuminated display guarantees constant control of the measured values. Another plus: The narrow tip also enables measurement in hard-to-reach places.
Furthermore, the clamp can be connected to REFMATE and the REFMESH app and thus contribute to an optimal adjustment of the system.
Functions:
- Target superheat
- Tube temperature and air temperature measurement
- Humidity measurement
- Calculation of wet bulb temperature
- Calculation of superheat and subcooling
- Temperature difference calculation - Delta T
- Ice water calibration
- Fast response time
- Permanent view of the measured values thanks to illuminated display
- Comfortable handling thanks to wireless connection and ergonomic design
- Simple operation with 2 buttons
- Real-time display of measured values on the clamp, the REFMATE, and the REFMESH app
- High range of 300 m
How can REFCO help you?
- -20 °C – 50 °C
- 5 – 100 %
- Temperature | Humidity
- -40 °C - 150 °C
- ± 1 °C
- 0.1 °C
- °C | °F
- -20 °C - 50 °C
- 2 x AAA
- Tube temperature and air temperature measurement
Humidity measurement
Wet bulb temperature calculation
Ice water calibration
Connection to REFMATE and REFMESH
Absolute humidity (REFMESH)
Enthalpy (REFMESH) - Blister
- Batteries | Quick Guide
- 5 - 44 mm
- 1
- Polyamide
- yellow | green
- CE
FCC
IC
RCM
RoHS
REACH - Yes
- 0.19
- 190
- 35
- 170
- 0.31
- 200
- 40
- 340
- 0.12
- 9026.9000
- Is the REFCLAMP compatible with the TAP?Copy link
NO, the REFCLAMP`s (4688704 & 4688733) are not compatible with the TAP (4687787).
TAP is compatible with the WIRELESS-CLAMP WTC only (4687785)
- Do your REFMESH products connect directly to the App?Copy link
Yes, all REFMESCH products can be directly connected from the App. The exception is the TRITECTOR. However, for a stable connection, we recommend connecting all products from the REFMATE and then connecting the REFMATE from the App.
- Correct installation for target superheat measurementCopy link
The following items are required for a correct target superhaet measurement:
1. REFMATE
2. 2x REFCLAMP
3. 1x K-TYPE-SENSOR
The correct installation can be found in the images.
Further Products
- New
AP-mA/3
3004258Adapter for VAMP condensate pumps, 3 pcs. 
14142
9881562Fin comb, with extra spare head
CA-CCL-60
4493622Set of 3 charging hoses with ball valve 1/4" SAE, 60"/150 cm, blue, red & yellow, 1x straight 1/4" SAE, 1x straight with ball valve 1/4" SAE and core depressor
INVERTER-CHECK-KIT
4678571Test kit for analysis of air conditioners
REFVAC-RC
4688541Wireless digital vacuum gauge connection 1/4"SAE male, Units: Micron, mbar, Pa, Torr, mTorr, psi and inHg
A-38010
4687957Access control valve 1/4" SAE x 1/4" SAE
14225
9881560Pocket mirror