![HY-TELL-hydraulic tube bender for cupper pipes with diameters form 1/4" to 7/8"-03 | © HY-TELL-hydraulischer Rohrbieger für Kupferrohr mit Durchmesser von 1/4" bis 7/8"-03 HY-TELL-hydraulic tube bender for cupper pipes with diameters form 1/4" to 7/8"-03 | © HY-TELL-hydraulischer Rohrbieger für Kupferrohr mit Durchmesser von 1/4" bis 7/8"-03](/20%20Bilder%20Produkte/30_Produktfotos_mit%20ArtNr/image-thumb__321__coreshop_productList/4688017_HY-TELL_photo_free_03.png)
The REFCLAMP measures both the tube and air temperature as well as the humidity in the ambient air of mobile and stationary refrigeration systems and heat pumps.
It has two sensors included: a pipe temperature sensor and a humidity sensor. Furthermore, the outside temperature can be measured by means of a plug-in K-type sensor.
The illuminated display guarantees constant control of the measured values. Another plus: The narrow tip also enables measurement in hard-to-reach places.
Furthermore, the clamp can be connected to REFMATE and the REFMESH app and thus contribute to an optimal adjustment of the system.
Functions:
- Target superheat
- Tube temperature and air temperature measurement
- Humidity measurement
- Calculation of wet bulb temperature
- Calculation of superheat and subcooling
- Temperature difference calculation
- Ice water calibration
- Fast response time
- Permanent view of the measured values thanks to illuminated display
- Comfortable handling thanks to wireless connection and ergonomic design
- Simple operation with 2 buttons
- Real-time display of measured values on the clamp, the REFMATE, and the REFMESH app
- High range of 300 m
- Technical Data
- -20 °C – 50 °C
- 5 – 100 %
- Temperature | Humidity
- -40 °C - 150 °C
- ± 1 °C
- 0.1 °C
- °C | °F
- -20 °C - 50 °C
- 2 x 2 AAA
- Tube temperature and air temperature measurement
Humidity measurement
Wet bulb temperature calculation
Ice water calibration
Connection to REFMATE and REFMESH
Calculation of superheat and subcooling in combination with the REFMATE
Target superheat in combination with the REFMATE
Temperature difference calculation - Delta T (in REFMESH)
Absolute humidity (REFMESH)
Enthalpy (REFMESH) - Blister
- Batteries | Quick Guide
- 5 - 44 mm
- 2
- Polyamide
- yellow | green
- CE
FCC
IC
RCM
RoHS
REACH - Yes
- Logistics
- 0.38
- 142
- 38
- 164
- 0.5
- 200
- 340
- 40
- 0.12
- 9026.9000
- Documents and Media
- Accessories
Further Products
FAQ
Questions about Product
- Is the REFCLAMP compatible with the TAP?
NO, the REFCLAMP`s (4688704 & 4688733) are not compatible with the TAP (4687787).
TAP is compatible with the WIRELESS-CLAMP WTC only (4687785)
- Do your REFMESH products connect directly to the App?
Yes, all REFMESCH products can be directly connected from the App. The exception is the TRITECTOR. However, for a stable connection, we recommend connecting all products from the REFMATE and then connecting the REFMATE from the App.
- Is the REFMATE updatable for new refrigerants?
Yes, REFCO provides all refrigerants and updates free of charge. The new refrigerants are made available through the REFMESH App (Settings --> REFCO Device Updates).
- Correct installation for target superheat measurement
- Why does REFCO use batteries instead of rechargeable batteries in their products?
All our REFMESH products can be battery-operated. They require 1.5V AA or AAA batteries. We deliberately avoid using rechargeable batteries since they need to be charged before a device can be used when depleted. Most service technicians have batteries on hand or can purchase them nearby. For long-term measurements, REFCO devices can also be operated with an external power source via the USB interface. The exceptions here are the REFCLAMP devices.